Menu
Gator Grid GG 20-20

Gator Grid GG 20-20

Biaxial Geogrid
Staircase, Patio, Landing Area and More

Description

Gator Grid GG 20-20, a biaxial geogrid, provides strength, longevity, excellent stress transfer and prevents failure to the internal structure of your staircases, patios, landing areas, retaining walls and steep slopes.

Applications & Benefits

Applications

  • Erosion control
  • Patio internal structure
  • Staircase internal structure
  • Behind retaining walls
  • General landscape

Benefits

  • Bi-axial: can be installed in both directions
  • Adds strength, stability and longevity
  • Helps reduce stress and load transfer to the structure
  • Soil separation for added stability

AVAILABLE IN THE FOLLOWING ROLL SIZES

GG2020-03050 3´ x 50´
GG2020-04050 4´ x 50´
GG2020-06050 6´ x 50´
GG2020-06300 6´ x 300´

Installation

Installation

** Disclaimer for Gator Grid GG 20-20

The soil composition may vary from location to location. Global stability of the soil has not been considered. It is the owner’s responsibility to take into consideration the soil parameters indicated on the label and to ensure that the soil’s properties meet construction standards. A soil analysis must be done before starting any wall project. Before the construction of your segmental wall and before using any type of Gator Grid and establishing the placement, consult a qualified local engineer and obtain a stamped plan. To ensure the structural integrity of your segmental retaining wall, follow manufacturer instructions and installation steps for the construction of your wall. These placement tables are not to be used on multi-tiered walls or in areas with excess water runoff, seepage or springs, unless first otherwise confirmed by a qualified local engineer. Additional Gator Grid than what appears on the label may be required in your application. This document should not be construed as engineering advice. We assume no liability of any kind if the instructions in the present disclaimer are not followed or if the owner’s use of the product is different than the one for which it is intended.