Menu
Flexlock Rubber, Paint and Tar Remover

Flexlock Rubber, Paint and Tar Remover

For Concrete Pavers, Wetcast and Natural Stone

Description

Flexlock Clean Rubber, Paint and Tar Remover + is effective in removing rubber, paint and tar from the surface of concrete pavers and natural stones. Furthermore, it could be used to emulsify some sealers and could be used as a cleaning agent when using a bonding agent such as Gator Rock Bond.

Features and Usage

Features

  • Washes off with water.
  • Easy to use.

Used On

  • For concrete pavers, wetcasts and natural stones that are warm to the touch.

Application & Instructions

Instructions

  1. Apply product to stain.
  2. Let it soak for 5 minutes.
  3. Apply product again.
  4. Immediately scrub with hard bristle brush.
  5. Repeat steps 3 & 4 until stain dissolves.
  6. Rinse thoroughly with water.
Notes

  1. This product dissolves sealants.
  2. Do not let product dry up on paver surface.
  3. Wear goggles and rubber gloves.
  4. Use at above 60°F (16°C) in dry conditions

Coverage

Products Retail Size Per Box Per Pallet
Flexlock Rubber, Paint & Tar Remover 946ml 6 units 24 boxes

Video

Limited warranty

Alliance Designer Products inc. cannot guarantee results as it has no control over surface preparation and product application. If this product is proven to be defective, on the condition that it was applied pursuant to the required method of application and surface preparation, the sole obligation of Alliance Designer Products inc. is to refund the purchase price. Proof of purchase is required for any claim. Alliance Designer Products inc. shall not be liable for any other damages whatsoever, direct or consequential. To the extent permitted by law, Alliance Designer Products inc. excludes any implied warranty of quality, merchantability or fitness for purpose.