Menu
Gator Grid GG 50-50

Gator Grid GG 50-50

Biaxial
Multi-level
Structural
Engineered walls

Description

GATOR GRID GG 50-50 Biaxial NO Memory (3420 lbf/ft) is a High Tenacity Polyester yarn combined to on-line coating with Oil mixed PVC on the Geogrid. Gator Grid GG 50-50, a biaxial geogrid, provides strength, longevity, excellent stress transfer and prevents failure to the internal structure of your large & muti-level engineered retaining walls and steep slopes. As a biaxial geogrid, GATOR GRID GG 50-50 has a high molecular weight as well as high-tenacity polyester yarns. Once unrolled on the ground, this Geogrid without memory remains flat once unrolled.

Applications & Benefits

Applications

  • Raised patio internal structure
  • Retaining wall structure
  • Large & multi-Level wall structure
  • Roadway structure (Sub-grade stabilization)
  • Steep slope stabilization
  • Parking space structure
  • General landscape
  • Soil stability
  • Erosion control

Features

  • UV-Resistance
  • Ageing resistance
  • High tensile strength
  • Easily combined with gravel and soil
  • No Memory, remains flat once unrolled.

Benefits

  • Biaxial: can be installed in both directions
  • Adds strength, stability and longevity
  • Helps reduce stress and load transfer to the structure
  • Soil separation for added stability
  • Remains flat once unrolled
  • Ageing resistant
  • High tensile strength
  • Easily combined with gravel and soil

Available in the Following Roll Sizes

NGG5050-06150 6′ x 150′
NGG5050-12150 12′ x 150′

Installation

Method of application of of GATOR GRID GG 50-50 Biaxial No memory (3420 lbf/ft) soil stabilization for added stability:

Installation

*This drawing is issued for information only. Do not use for construction. Do not measure from this drawing.

** Disclaimer for Gator Grid GG 50-50

The soil composition may vary from location to location. Global stability of the soil has not been considered. It is the owner’s responsibility to take into consideration the soil parameters indicated on the label and to ensure that the soil’s properties meet construction standards. A soil analysis must be done before starting any wall project. Before the construction of your segmental wall and before using any type of Gator Grid and establishing the placement, consult a qualified local engineer and obtain a stamped plan. To ensure the structural integrity of your segmental retaining wall, follow manufacturer instructions and installation steps for the construction of your wall. These placement tables are not to be used on multi-tiered walls or in areas with excess water runoff, seepage or springs, unless first otherwise confirmed by a qualified local engineer. Additional Gator Grid than what appears on the label may be required in your application. This document should not be construed as engineering advice. We assume no liability of any kind if the instructions in the present disclaimer are not followed or if the owner’s use of the product is different than the one for which it is intended.