Flexlock Edge<br>Flex and Rigid

Flexlock Edge
Flex and Rigid

Designed for straight or curved installation
It is especially easy to use and quick to install


Flexlock Edge Flex and Rigid are made with 100% Polypropylene Copolymer. This will give it great strength as well as providing greater flexibility. We have a Rigid model which is ideal for straight applications and the a Flex model that can be used for all curved applications such as walkways, paths, entrances etc. Both the Rigid and Flex can be locked together with the ‘’Twist & Lock’’ connection system. Finally, the Rigid could be transformed in a partial Flex by cutting the bridge support between each triangular angles.

For Use On
Flexlock Edge is an excellent choice to help define alleys, driveways or sidewalks.
Flexlock Edge is designed for straight or curved installation. It is especially easy to use and quick to install.


  • The Flex can connect to the Rigid.
  • Uses a “Twist & Lock” connection system.
  • Will not corrode.
  • Easy-to-use.
  • Available in flexible or rigid edges.
  • Xtra versatile.
  • Xtra robust system.
  • Xtra support strength.
  • UV resistant.
  • Come in 8-ft lengths.
  • Use with Flexlock Nails or Gator Screws.


Products Retail Size Units per Pallet
Flexlock Edge Flex 8′ per peice
24 Pieces/Bundle
(192 Ft)
28 Bundles on a pallet
5376 Ft
Flexlock Edge Rigid 8′ per peice
24 Pieces/Bundle
(192 Ft)
28 Bundles on a pallet
5376 Ft

Application & Instructions


  1. It can be installed either before or after the paver installation.
  2. Use one 10” nail every foot for greater support strength.
  3. Use the Twist & Lock feature to secure the edging lengths together.
  4. Nail at every Twist & Lock junction, this will ensure continuous lateral support.

Both rigid and flexible pieces can be joined together.

Flexlock Edge Flex and Rigid

Strong Lateral Support

A triangular angle at all key points has been engineered to provide a strong lateral support, essential for the load transfer on the paving units. The Rigid model can be modified into a Flex by simply cutting the connector between each triangular angle.