For dry cast concrete pavers
Flexlock Resealer for concrete pavers is made from acrylic based polymers. Flexlock Resealer will penetrate the formula of the existing sealer and reactivate the molecules to create a rejuvenated seal to protect the paver surface. Thus reducing the penetration of oil and dirt, as well as protecting them from de-icing salt.
*The container must at all times be stored at above 32°F / 0°C and away from direct sun to receive the benefit under the Limited Warranty.
This sealer is to be employed without thinning or diluting under normal environmental conditions. Use acetone for cleaning. Flexlock Products shall not be liable for any non-compliant use, unless the manufacturer, distributor, or seller knows that the supplied coating would be used in a noncompliant manner.
Flexlock Resealer is to be used to re-seal over existing solvent based sealers.
Coating Category: Low Solids Coatings. VOC Concentration Limits: <120 g/L (grams of VOC per liter of material).
|Flexlock Resealer||3.78 L. (1 U.S. gal.)||175 sq. ft / 16 sq.m|
|Flexlock Resealer||18.9 L. (5 U.S. gal.)||875 sq. ft / 80 sq.m|
|Products||Retail Size||Per Box||Per Pallet|
|Flexlock Resealer||3.78 L. (1 U.S. gal.)||4 units||24 boxes|
|Flexlock Resealer||18.9 L. (5 U.S. gal.)||0 units||48 pails|
Before applying the product, the user/buyer must determine its suitability for intended use and user/buyer assumes all risks in that regard. It is a condition of the Limited Warranty that before using the product on the intended larger area, the user/buyer must first test the product on a small less observed area of approximately 4 sq. ft. (0.4 sq. m.) to ensure results meet user/buyer’s expectations. In the event that no test is carried out, the Limited Warranty will only apply to 4 sq. ft. (0.4 sq. m.).
ALLIANCE DESIGNER PRODUCTS INC. cannot guarantee results as it has no control over surface preparation and product application. If this product is proven to be defective, on the condition that it was applied pursuant to the required method of application and surface preparation, the sole obligation ALLIANCE DESIGNER PRODUCTS INC. is to refund the purchase price. Proof of purchase is required for any claim. ALLIANCE DESIGNER PRODUCTS INC. shall not be liable for any other damages whatsoever, direct or consequential. To the extent permitted by law, ALLIANCE DESIGNER PRODUCTS INC. excludes any implied warranty of quality, merchantability or fitness for purpose.The container must at all times be stored at above 32°F (0°C) and away from direct sun to receive the benefit under the Limited Warranty.